Skip to main content

Shape Divider

The Corporate 2 demo homepage, where the purple gradient hero ends in a wide curved shape divider instead of a straight edge
A curved shape divider closing the hero on the Corporate 2 demo.

A Shape Divider replaces the straight horizontal edge between two rows with a shaped one: a curve, a tilt, a wave, a run of mountains. It is not an element you add to a page: it is a setting that lives on the Row itself, so any row can carry one without adding anything to its content.

Fifteen shapes are available, and each can sit at the top of the row, the bottom, or both. The divider is drawn in a single flat color, which is what makes the effect work: set it to the color of the adjacent section and the shape reads as the boundary between the two.

Reach for one when:

  • Two stacked sections of different colors need a softer transition than a hard line
  • A hero section should flow into the content below rather than stopping abruptly
  • A page of full-width color blocks needs rhythm without extra graphics
  • You want an angled or curved edge without exporting an image for it
Sections have them too

The same settings are available on the Section element, which is useful when you want one shaped edge across a group of rows rather than on each row individually.

Usage​

  1. Open the Row Settings: Hover the row and click the pencil icon to open its configuration.
  2. Go to the Shape Divider Tab: Select the Shape Divider tab and tick Enable Shape Divider.
  3. Pick a Shape: Choose from the visual shape picker. Each option previews the edge it produces.
  4. Match the Color: Set Shape Divider Color to the background color of the section the shape points into, not the row it belongs to. This is the step that makes the divider look like a boundary rather than a floating graphic.
  5. Set the Height: Give the divider a height, then check it on tablet and phone. A shape sized for a wide desktop row usually needs reducing on narrow screens.

Options​

Enable Shape Divider​

Turns the divider on for this row. The remaining settings apply only once this is ticked.

Shape Type​

The shape drawn along the row's edge, chosen from a visual picker.

CurveA single symmetrical curve.

Curve OpacityA curve with a second, semi-transparent curve behind it.

Curve Asym.An asymmetrical curve, weighted to one side.

Curve Asym. AltThe asymmetrical curve mirrored.

TiltA straight diagonal edge.

Tilt AltThe diagonal mirrored.

TriangleA centered triangular notch.

FanA wide fanned edge.

MountainsA layered mountain range silhouette.

WavesA wave edge in a single solid color.

Waves OpacityWaves with a semi-transparent second layer.

Waves Opacity 2An alternative two-layer wave arrangement.

CloudsA rounded, cloud-like edge.

SpeechA speech-bubble style tail.

Straight SectionA straight edge, useful for layering a flat band of color.

Shape Divider Color​

The fill color of the shape. Set this to the background color of the neighboring section so the shape appears to be part of it. A divider in a color that matches neither section reads as an accident.

Shape Divider Position​

Where the shape sits on the row:

PositionResult
BottomShape on the row's lower edge.
TopShape on the row's upper edge.
Bottom + TopA shape on both edges.
  • Shape Divider Height (Desktop / Tablet / Phone) The height of the shape, per device, in pixels (px) or percent (%). Each device has its own field. A 200px curve that looks right on desktop is usually far too tall on a phone, where it can consume most of the screen before any content appears.
  • Bring to front? Places the divider on the top layer, above any content it overlaps. Leave this off for a normal edge; turn it on when the shape should cross over an image or element that sits at the row boundary.